Technical FAQs

Ask a Question

How to set IP in Network Management Card 2?

you can manually configure network settings.
1. Contact your network administrator to obtain the IP address, subnet mask,
and default gateway for the Network Management Card.

2. Use this command to configure network settings. (Text in italics indicates a
variable.)
          tcpip
                  -i yourIPaddress
                  -s yourSubnetMask
                  -g yourDefaultGateway
         For each variable, type a numeric value that has the format
         xxx.xxx.xxx.xxx.
The command can be entered on one line. For example, to set a system IP
address of 156.205.14.141, a Subnet Mask of 255.255.255.0 and a default
gateway of 156.205.14.1, type the following command and press ENTER:
tcpip -i 156.205.14.141 -s 255.255.255.0 -g 156.205.14.1

3. Type reboot. The Network Management Card restarts to apply the
changes.
Was this helpful?
What can we do to improve the information ?